This type of panel is placed at the output of distribution transformers and is used to distribute energy to different parts. It can be applied up to 750 volts. The lighting board is also installed in these boards upon request.
Weak pressure panels include the following:
1. Control and process
2. Correction of power factor
3. Power plant protection
4. Transformer
5. Intelligent
6. Diesel starter
7. Normal, emergency, UPS
Quality Control
All the production steps are checked by the quality control personnel for the correctness of the production parts according to the production plans and can guarantee the correctness and accuracy of the production based on the design of the parts.
Technical and Engineering Unit
With the presence of experienced engineers, this unit is capable of designing and producing plans for all the assistances of respected employers, which is divided into the following two parts.
Electrical engineers who are able to design and draw the electrical maps of all the boards according to the requested logic, while accompanying and fully consulting the production technicians, test all the production boards at the end of the work.
Mechanical engineers who design all parts of the panel according to their work experience and sufficient knowledge of production line devices and all kinds of electrical devices available in the market.
Quality and Competition
Pars Technik Tablo company, having enough equipment to perform all the tests defined according to the IEC standard, is approved and guaranteed by the Ministry of Energy and electricity distribution companies. The company's strategy is to increase the quality level and improve the competitiveness of the products at the level of domestic and international competitors and provide appropriate services, giving customers the opportunity to gain the necessary assurance from their commercial relationship with this group.
Cutting
Automatic <
punch
Two fully automatic machines of Amada company and Baycal company perform all the punching and cutting operations of the designed boards with the special software of CNC machines up to 6 mm thick sheet.
bend
All the bending works required by the company are done by 3 bending machines with precision and delicacy, performing different angles with successive sequences stored for accurate and similar production in cases of mass production is one of the advantages of these machines. /p>
Coloring
In this unit, the painting operation is done with the electrostatic (powder) system, the parts are painted and the color is fixed and baked on the part in the ovens according to the allowed temperature and duration.
Preparation Preparation (Cleaning)
This step is very important for the correct coloring of the piece. In fact, by removing grease, metal oxides and dust, it prepares a good surface free of additional materials for applying paint. This action is carried out by degreasing ponds and acid washing and phosphating surfaces according to the standard.
Welding
According to the type of design, there are welding cases in the production boards, which are done by skilled personnel with welding system, MIG, MAGSMAW, and the final finishing operation is done carefully after that. "Page welding" and "spot welding" systems are used to make the body of the panels.
Foam Injection
In order to increase the reliability factor of the IP system and the lack of permeability against external factors such as dust moisture, a fully automatic foam injection machine is used under the control of the CNC system. Due to the high speed of work and great accuracy, enough time to meet Foam injection needs of other colleagues are also available.
Assembly Unit
After the production and painting process, the panel assembly operation begins, where two groups of electrical assembly and mechanical assembly are working together in this unit. The electrical assembly group is responsible for the main task of wiring the panels made based on the plans designed in the engineering technical unit, which is done with special delicacy.
mechanical assembly group
The assembly of the skeleton of the panels, as well as the construction of copper busbars and the installation of electrical equipment, are among the activities of this unit, which cannot be performed by experienced personnel.
- To make tires, semi-automatic multi-purpose machines are used, which perform cutting, punching and bending operations with the required precision.
Rain and Wall Panels
Distribution rain panels with different amperes can be produced with IP65 grade. Surface and built-in wall panels can be designed and produced with the latest and most beautiful designs available in the market.
Junction box panels can also be produced and designed with Ip65 grade and with different sizes.
Control Desk
Control desks are widely used in factories and production lines to control production machines, which are often ordered with different dimensions and sizes, all of which can be designed and produced.